Banggood

We recommend this product. Delivery on time.

The surface finish on this is incredible, and when I milled two drive pockets to attach it to my NT30 spindle mill, I measured 0 TIR on a 0.01mm test indicator. Beautifully machined from good materials, I cannot believe I finally have an ER32 collet chuck of this quality for my home machine shop.

Arrived before expected date. Appears to be very good quality unfortunately did not fit my machine as it did not have key slots, but did fit the machine of a friend.

concentricity accuracy is +0,04/0,00 by spindle accuracy of +0.02/0,00 It would be better if customer can choice different pull studs (I need for example BT30/45°

Nice quality steel. I use NT30 Collet, You need mill 16mm keyways. Not a problem. M12 thread is sort, but longer spindle bar will fix that.

Much better than wat I had already, surpriced of the quality.Needed to modify a little but was no possible too hard material. Can only recommend !!!

Produit de bonne qualité

Bonne qualité de produit Rapidité de livraison

Very good quality. Superb finishing

great