Customer Reviews

4.93 out of 5
See all 1371 reviews
Write a Review
  • All Reviews (1371)
  • Image (133)
  • Video (3)
  • All Star
    • All Star(1371)
    • 5 Star(1308)
    • 4 Star(44)
    • 3 Star(7)
    • 2 Star(7)
    • 1 Star(5)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
|
Show Original

A part of the review has been auto-translated.

  • 26/08/2021

    Great circuit

    Comments
    Show Original
  • 11/02/2022

    lässt sich nicht aktualisieren

    Comments
    Show Original
  • 23/04/2019

    - Recieved in good packing. Looks same as given in image. - Working fine with my arduino uno3. This worked like charm. Initially, I was little frustrated as I was able to connect it with Arduino and pair it with my Mobile but not able to send data. Later I realized that I was making mistake because of incorrect baud rate settings in my code. It works best with baud rate of 9600.

    Comments
    Show Original
  • 10/11/2017

    Me gustan sus acabados. Busqué otros por ebay y se iban por encima de los 4 euros por lo que me parecen unos módulos muy baratos y que tienen mucha fiabilidad. La marca Geekcreit además tiene muy buenas referencias y yo he comprado más componentes de esta marca y no suelen dar problemas. Recomiendo su compra, no los vais a encontrar más baratos.

    Comments
    Show Original
  • 11/05/2020

    well received in a suitable time even if higher than that indicated. on the other hand all seem to work correctly according to my first very basic tests. Detection: OK connections:OK For the rest I'm missing the rest of the order to do the rest of my tests in any case I recommend the product for the moment

    Comments
    Show Original
  • 02/12/2019

    Uff, uff, uff. It took me a very good time to get a proper program in my PC to configure and learn AT commands language. Read different sources over Internet to guess your command sintaxis. Used to send my Taranis telemetry over my Android.

    Comments (2)
    Show Original
  • 15/08/2017

    I used this to connect to an Arduino Micro board. Works perfectly! Note you may need to switch the BAUD rate there are tutorials online and in the end, I used the Arduino IDE software to update the board. Also, just-in-case when connecting to your phone or computer it will ask for a PIN the default PIN is 1234 unless you change it via the Arduino IDE software. For the Arduino novice, when connecting to your Arduino board the TX from the Arduino connects to the RX of the Bluetooth board and the RX from the Arduino connects to the TX of the bluetooth

    Comments
    Show Original
  • 16/10/2017

    I brought this for a Matek FC board, so I can set various parameters in board without cable connections. There is an app for android, that can make it working. U can change the baud-rate to 115200 with a FTDI programmer card, witch I did. Full description here : https://quadmeup.com/adding-bluetooth-telemetry-to-flip32-and-cleanflight/

    Comments
    Show Original
  • 09/06/2017

    The parcel arrived fairly quickly. Items were packaged carefully and arrived in excellent condition. The module itself works well. You need to connect the module's RX pin to the Arduino's TX pin and vice versa. It is also recommended to put a resistor in series between the Arduino's TX and the module's RX (the video I watched recommended a 4,7k and a 2,2k in series; I didn't have either of those so I used a 10k one which worked perfectly). This is because the data pins on the module expect a lower voltage and 5V would harm them. This module is very easy to use. You don't need any libraries; it can be controlled using the standard serial interface. I wired up a circuit with an Arduino Nano, the HC-06 and an LED. Using a Bluetooth serial terminal app on my Android phone I could turn the LED on and off.

    Comments
    Show Original
  • 06/04/2017

    If you want to use the module with APM in Mission Planner, it is best to immediately connect the FTDI FT232RL decoder and AT commands in the serial port monitor to AT + BAUD7 (57600) and AT + NAMEARDUPILOT. Then we have the optimal transmission speed and easy configuration with Mission Planner. In config/tuning only remove APM Reset.

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • US$4.76
    • US$36.00
    • US$8.99
    • US$3.99
    • US$8.99
    • US$9.99
    • US$18.99
    • US$23.99
    • US$3.99
    • US$5.99
    • US$29.99
    • US$28.99
    • US$31.99
    • US$3.78
    • US$7.99
    • US$12.99
    • US$9.99
    • US$4.99