Customer Reviews

4.91 out of 5
See all 1242 reviews
Write a Review
  • All Reviews (1242)
  • Image (136)
  • Video (5)
  • All Star
    • All Star(1242)
    • 5 Star(1176)
    • 4 Star(40)
    • 3 Star(12)
    • 2 Star(3)
    • 1 Star(11)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
Show Original

A part of the review has been auto-translated.

  • 13/02/2015

    Arduino Lib : Arduino Code : Arduino Uno or Nano Pins: A4=SDA , A5=SCL

    Comments (1)
    Show Original
  • 28/05/2015

    Very easy to setup. But change default adress for I2C from 0x 3D to 0x 3C !!!!! Required drivers: and Works with 3.3V and 5V

    Show Original
  • 13/08/2019

    Great little display have it installed in a housing and with a Wemos mini am able to create a cool weather station

    Show Original
  • 14/04/2016

    These displays are tiny, but very cool. The I2C interface reduces number of pins required. has the library you need to drive this gem. Great value for an easy to interface TINY display. Not sure why I write these, I never get the review points.

    Show Original
  • 16/05/2017

    My first try with Arduino whatsoever. After some troubles with virtual COM port and connecting my Nano V3 to IDE, this display worked after first try. I used the U8Glib_OLED library and U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE); setup.

    Show Original
  • 01/02/2018

    It looks like the two first pixel vertical columns are in fact the two last ones !! so every picture or drawing or text I display is offsetted by two pixels horizontally and the right border loops to the left one displaying the two last right columns to the left of the screen... those two lines are also vertically offseted by 4 or 5 pixels I'm very dissapointed :(

    Comments (3)
    Show Original
  • 25/07/2016

    Ordered these and it arrived very fast. I use the displays everywhere. they are easy to connect and work great with LiPo battery powered Arduino. Will buy more.

    Show Original
  • 04/01/2017

    I ordered this product but the model that I have received is not 128x64 but 128x32. I expect banggood to send me the right model. Nevertheless the model 128x32 model I received works properly.

    Comments (1)
    Show Original
  • 02/02/2018

    It is smaller than it looks on web page. Good quality, easy to get working with Adafruit library from github. Packed in small plastic box - very good !

    Show Original
  • 03/02/2017

    Works like a charm (I2C address can be changed behind the PCB). I had to download the libs from here : Changed Adafruit_SSD1306.h to make it work with 128x64 : #define SSD1306_128_64 // #define SSD1306_128_32 // #define SSD1306_96_16 Loaded sketch example that didn't work so I ran an i2c scanner and found the board addr to be 0x3C and changed it in the example source code : display.begin(SSD1306_SWITCHCAPVCC, 0x3C); This 0x3C is not the 0x78 written on the board (see attached photo) so I guess that if you change the SMD resistor you will switch between 0x3C and 0x3D and not 0x76 and 0x7A ... et voila !

    Show Original

    Total 0 pages

    Go to page


    You might be interested in

    recommendation for you
    • US$49.99
    • US$54.89
    • US$27.99
    • US$29.99
    • US$3.99
    • US$10.99
    • US$5.29
    • US$38.63
    • US$49.99
    • US$9.99
    • US$45.99
    • US$9.99
    • US$16.99
    • US$76.35
    • US$13.73
    • US$69.99
    • US$80.50
    • US$7.99