I've tried this out on a MicroMinimOSD, using the MWOSD firmware. Seems to work well - picked up 8 sats within a minute and can run at 115200. Wasn't particularly helpful that it came without any cable, or diagram at least giving the pinouts. Have worked out what they are, and leave this picture to help others

I've tried this out on a MicroMinimOSD, using the MWOSD firmware. Seems to work well - picked up 8 sats within a minute and can run at 115200. Wasn't particularly helpful that it came without any cable, or diagram at least giving the pinouts. Have worked out what they are, and leave this picture to help others

I've tried this out on a MicroMinimOSD, using the MWOSD firmware. Seems to work well - picked up 8 sats within a minute and can run at 115200. Wasn't particularly helpful that it came without any cable, or diagram at least giving the pinouts. Have worked out what they are, and leave this picture to help others

Compared to the presentation, delivered without cables and without connector. Wiring the module, see picture. Tested with the Ublox U-CENTER program, works perfectly.

Compared to the presentation, delivered without cables and without connector. Wiring the module, see picture. Tested with the Ublox U-CENTER program, works perfectly.

Compared to the presentation, delivered without cables and without connector. Wiring the module, see picture. Tested with the Ublox U-CENTER program, works perfectly.

There were no wiring diagrams included, and the pins aren't even numbered, but a little research found the answers. Once hooked up, the GPS locked on in under a minute and seems accurate. The TTL data stream is 9600 bps, as advertised. Good product for the experimenter.

There were no wiring diagrams included, and the pins aren't even numbered, but a little research found the answers. Once hooked up, the GPS locked on in under a minute and seems accurate. The TTL data stream is 9600 bps, as advertised. Good product for the experimenter.

There were no wiring diagrams included, and the pins aren't even numbered, but a little research found the answers. Once hooked up, the GPS locked on in under a minute and seems accurate. The TTL data stream is 9600 bps, as advertised. Good product for the experimenter.

According to the description in earlier reviews, it was easy to connect this GPS Modul to my FTDI Interface. This is my wiring interface = wire color, see wiring diagram FTDI-Interface GPS DTR n.C. RX green yellow RX TX yellow green TX 3.3-5V red black GND CTS n.C. GND black red +3.3-5V Current at 3.3 to 5V is 47mA = constant; it works at 3.3V and 5V without any modification, don't care about supply voltage! Within 60 seconds I have at outdoor a satfix w. SAT signal between 30-50dB and 9 to 11 Sats.See Ublox picture. Even indoor near 1m of window, Satfix is possible, with signal levels between 10 to 30 dB! With Ublox Program it is very easy to change Data rate from 9600 Baud to other value. Will buy more of this GPS.

According to the description in earlier reviews, it was easy to connect this GPS Modul to my FTDI Interface. This is my wiring interface = wire color, see wiring diagram FTDI-Interface GPS DTR n.C. RX green yellow RX TX yellow green TX 3.3-5V red black GND CTS n.C. GND black red +3.3-5V Current at 3.3 to 5V is 47mA = constant; it works at 3.3V and 5V without any modification, don't care about supply voltage! Within 60 seconds I have at outdoor a satfix w. SAT signal between 30-50dB and 9 to 11 Sats.See Ublox picture. Even indoor near 1m of window, Satfix is possible, with signal levels between 10 to 30 dB! With Ublox Program it is very easy to change Data rate from 9600 Baud to other value. Will buy more of this GPS.

According to the description in earlier reviews, it was easy to connect this GPS Modul to my FTDI Interface. This is my wiring interface = wire color, see wiring diagram FTDI-Interface GPS DTR n.C. RX green yellow RX TX yellow green TX 3.3-5V red black GND CTS n.C. GND black red +3.3-5V Current at 3.3 to 5V is 47mA = constant; it works at 3.3V and 5V without any modification, don't care about supply voltage! Within 60 seconds I have at outdoor a satfix w. SAT signal between 30-50dB and 9 to 11 Sats.See Ublox picture. Even indoor near 1m of window, Satfix is possible, with signal levels between 10 to 30 dB! With Ublox Program it is very easy to change Data rate from 9600 Baud to other value. Will buy more of this GPS.

Been using this for about a month on my quad. Reasonably quick to get sat lock. Small size is perfect. Cable tied to the lipo strap.

Been using this for about a month on my quad. Reasonably quick to get sat lock. Small size is perfect. Cable tied to the lipo strap.

Been using this for about a month on my quad. Reasonably quick to get sat lock. Small size is perfect. Cable tied to the lipo strap.

komp rozpoznaje jako GPS ublox 7, od 9 - 11 satelitów łapie przy zachmurzeniu, HDOP najmniejszy jaki złapał to 0.8m więc jest ok, można włączyć glonasa, ale nie działa równocześnie z gpsem i ma większy błąd hdop 2.6m, dobra cena wymiary 3x2.5cm grubość 6mm. układ wyprowadzeń od zewnętrznej krawędzi płytki to :RX,TX,masa,plus.

komp rozpoznaje jako GPS ublox 7, od 9 - 11 satelitów łapie przy zachmurzeniu, HDOP najmniejszy jaki złapał to 0.8m więc jest ok, można włączyć glonasa, ale nie działa równocześnie z gpsem i ma większy błąd hdop 2.6m, dobra cena wymiary 3x2.5cm grubość 6mm. układ wyprowadzeń od zewnętrznej krawędzi płytki to :RX,TX,masa,plus.

komp rozpoznaje jako GPS ublox 7, od 9 - 11 satelitów łapie przy zachmurzeniu, HDOP najmniejszy jaki złapał to 0.8m więc jest ok, można włączyć glonasa, ale nie działa równocześnie z gpsem i ma większy błąd hdop 2.6m, dobra cena wymiary 3x2.5cm grubość 6mm. układ wyprowadzeń od zewnętrznej krawędzi płytki to :RX,TX,masa,plus.

I got this GPS just to try but it's been quite an amazing piece of stuff. I get 9 satellites inside the house in less than 2 minutes. That's quite cool.

I got this GPS just to try but it's been quite an amazing piece of stuff. I get 9 satellites inside the house in less than 2 minutes. That's quite cool.

I got this GPS just to try but it's been quite an amazing piece of stuff. I get 9 satellites inside the house in less than 2 minutes. That's quite cool.

I was hoping to use a solderless breadboard, for fast prototyping. Unfortunately it came without the cable. Lowering the rating, just because of this inconvenience and because items MUST match the picture.

I was hoping to use a solderless breadboard, for fast prototyping. Unfortunately it came without the cable. Lowering the rating, just because of this inconvenience and because items MUST match the picture.

I was hoping to use a solderless breadboard, for fast prototyping. Unfortunately it came without the cable. Lowering the rating, just because of this inconvenience and because items MUST match the picture.

The product received doesn't have the cable/connector. Only the 4 holes remain for soldering, but no diagram can be found on the internet. I hope this is solved soon so I can connect to my SP F3!

The product received doesn't have the cable/connector. Only the 4 holes remain for soldering, but no diagram can be found on the internet. I hope this is solved soon so I can connect to my SP F3!

The product received doesn't have the cable/connector. Only the 4 holes remain for soldering, but no diagram can be found on the internet. I hope this is solved soon so I can connect to my SP F3!

The Product Works as expected. Minor inconvenience that the Pins aren't labeled.

The Product Works as expected. Minor inconvenience that the Pins aren't labeled.

The Product Works as expected. Minor inconvenience that the Pins aren't labeled.