Compatibility
To confirm that this part fits your vehicle, please enter your vehicle's details below.
-
Year:
-
Make:
-
Model:
-
Submodel:
-
Trim:
-
Engine:
- Clear All
This part is compatible with 0 vehicle(s).
Show all compatible vehicles
This part is compatible with 1 vehicle(s) matching
This part is not compatible with
- Year
- Make
- Model
- Submodel
- Trim
- Engine
FlySky FS-RM003 Transmitter Module Compatible AFHDS 2A For FS-TH9X Transmitter
OVERVIEW:
The 2. 4GHz Automatic Frequency Hopping Digital System Second Generation adopted by FS-RM003 can effectively prevent external interference, has the function of failsafe protection, and compatible with the standard R slot transmitters available on the market.
Description:
Brand Name: FlySky
Item Name: FS-RM003 Transmitter Module
Model: FS-RM003
Dimensions: 178 * 52 * 40mm
Weight: 41g
Built for: TH9X
Wireless frequency: 2.4GHz
Transmission power: <20dBm
Wireless protocol: AFHDS 2A
Range:> 800m (air)
Latency: <15ms
Antenna type: external single antenna
Power: 4.5V-18V
Data port: PPM
Temperature range: -10 ℃ — + 60 ℃
Humidity range: 20% -95%
Online update: Yes
Certification: FCC ID: N4ZFRM00300
Compatible Protocol: FlySky AFHDS 2A
Features:
Second generation automatic frequency hopping digital system
Supports AFHDS 2A receivers
Can be installed in the FS-TH9X
Can switch output modes
BIND Method:
The RF module allows two binding methods. During binding, please install and connect the 2.4G RF module first, and then access the binding state for binding.
Method 1:
- Please connect the PPM interface first, press and hold the BIND key of RF module and turn on the power supply at the same time. The LED indicator flashes quickly, the device enters the binding state; The LED indicator is always on, the binding is successful.
Method 2:
- When the RF module does not receive the feedback from the receiver, the LED indicator flashes slowly, the binding key is pressed
3 times quickly (within 2S)to re-enter into the binding state.
Note: The user can choose one of the binding methods according to the actual situation. If the binding fails, please repeat the binding steps of Method 1 or Method 2.
Compatibility:
- The FS-RM003 V2 module is compatible with the PL18/NV14/FS-TH9X along with various other Radios when using PPM output.
- The FS-RM003 V2 module is compatible with all AFHDS 2A receivers such as the FS-X14S/FS-iA8X/FS-X8B/FS-X6B/FS-A6/FS-iA6/FS-A3/FS-iA6B/FS-iA4B/FS-iA10B.etc.
Failsafe:
This function protects the user by preventing the model from behaving unexpectedly if signal is lost.
- After the RF module is powered on, binding successfully and enters into the normal state, press the BIND key for 3S until the indicator
light flashes to trigger the fail-safe protection setting. The RF module saves the current channel value as the fail- safe protection value and sends it to the receiver, and the fail-safe protection is set successfully.
Package Included:
1 x FS-RM003 Transmitter Module
,
