Customer Reviews

4.93 out of 5
See all 3170 reviews
Write a Review
  • All Reviews (3170)
  • Image (485)
  • Video (1)
  • All Star
    • All Star(3170)
    • 5 Star(3017)
    • 4 Star(118)
    • 3 Star(20)
    • 2 Star(4)
    • 1 Star(11)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
Show Original

A part of the review has been auto-translated.

  • 18/11/2020

    Very good welder for the money. It strikes the electric arc nicely, stably maintains the set parameters and, above all, welds nicely and is very small. The only drawback that bothers me personally is the highly inflated parameters. At the maximum intensity that the manufacturer specifies at 250 amps, the welder gives 132. I took measurements and at the maximum settings it is 130 amps, and at the lowest 56. The welder is perfectly welded with 2.5 and 3.2mm electrodes. With a little experience of the welder, it is possible to weld with a 4mm electrode. In my device, I changed the welding current display range to real 132 amperes. This can be done with the potentiometer marked in my photo. If the manufacturer did not overestimate the parameters, surely more people involved in welding would be interested in this device. After minor modifications, this welding machine is an ideal device for DIY enthusiasts and people who weld on a mobile basis. Sorry for the translation, but I did it in translator.

    Comments (23)
    Show Original
  • 08/07/2020

    Peace be with you. The product's good for now, so for the money, I'd say atom ants. I hope we can use it for many years. I bought 200 amperes, which were precedent yellow, and I was happy to take this digital 250 ampere orange, which I thought would do any repair work you could do at home. I recommend Turkey for those who will order. I ordered on June 28, Aras Cargo delivered today. I didn't pay any external fees. Thank you.

    Comments (23)
    Show Original
  • 15/09/2020

    Recieved in 12 days from order 👍 Product undamaged. With a 16 mm sq copper short tested 53A @ min dial setting, 82A at dial reading of 120A and 118A @ dial =250A. Earth wire had no continuity added a serated washer and wire loop to improve. Capacitor was touching heat sink. Added spacer. Ran short for about 3min while ramping up and down between test points. 10 min later opened heat sink hot to touch about 40 Deg C. Open circuit voltage about 62 volts DC across the range. On AC meter measured 0 volts. Frequency = 0 Hz. Now to do a weld test. DC Polarity correct as indicated.

    Show Original
  • 14/01/2021

    ήρθε πολυ γρήγορα. Από CZ σε 10 μέρες. παρά πολύ καλή. πολυ μικρη και ελαφριά. Ερχετε χωρίς αρσενικό φις σουκο και χωρίς Τσιμπίδες. Μέσα έχει μόνο τους αντάπτορες για τα καλώδια.

    Comments (3)
    Show Original
  • 10/02/2020

    Egyik jól működött. A másik hamis értéket jelzett ki. A műszer hátoldalán le volt tépve egy kondenzátor (C2) és megszakadt az R1 ellenállásra menő vezeték. Visszaforrasztás után 001 és 003 között változott az érték. A kondenzátor átvezetett, 961 Ohm-ot lehetett mérni rajta. Cseréje után jó lett a kijelzés. Hegeszteni lehet mindkettővel.

    Comments (1)
    Show Original
  • 11/04/2021

    Fast fast enough, one way from the next. It's only natural and simple to keep. Quitely the reason why is that it is not possible to be allowed to gluing!!! Very quick delivery, a week from the Czech warehouse. It's too small and it's too easy to carry. Inside, the assembly quality is very good without any obvious problem, it remains to be tested on a stick!!!

    Comments (2)
    Show Original
  • PopVIP1

    Absolut hervorragendes Gerät. Ist heute angekommen. Stecker angebaut und ausprobiert. 4mm Elektrode auf 220A absolut sauber geschweisst. 1,5mm auf 60A mit Blech getestet, hervorragend! Und sooo klein. Ganz tolles Gerät für das Geld!!!

    Comments (6)
    Show Original
  • VanVIP3

    He had some problems: I switched it to 3*2.5 Folded fan cable and out of the plug The amps aren't 250. But 119A, which is normal for this size the glue with 2,5 electrode

    Comments (13)
    Show Original
  • 18/01/2022

    The welding machine is good, but is not 250A. I replaced the resistor 5.2KΩ with variable one 20kΩ (3296 W 203) as shown on the pictures. I set it to 3.22KΩ. Now my welding machine display from 20A to 160A. This is closer to real.

    Comments (3)
    Show Original
  • 23/01/2021

    Aras was delivered to my home by cargo in as little as 10 days, I didn't pay any extra for receiving it with shipping including tax I opened it up nice and took it out, and I looked into it, and I don't know how long it'll last, so I took it for a hobby to do my own thing in my house. For the record, welding tongs and chassis tongs and cables don't come out, and I've also done a tool welding test for that price, a successful product.

    Comments (3)
    Show Original

    Total 0 pages

    Go to page


    You might be interested in

    recommendation for you
    • US$41.99
    • US$4.99
    • US$9.99
    • US$26.39
    • US$29.99
    • US$29.59
    • US$53.99
    • US$525.99
    • US$7.39
    • US$20.99