Precise details:

One Combo. Zero Compatibility Guessing.
Buying a camera and VTX separately means voltage mismatches, connector puzzles, and the nagging doubt that you've paired the wrong components. The EWRF Combo eliminates all of that. A 1500TVL starlight camera and a 48CH switchable 1000mW VTX—pre-matched, pre-tested, ready to wire into your build and fly.

1500TVL. Not Marketing Math. Real Clarity.
This camera resolves 1500TVL of horizontal detail through a 1/3" CMOS sensor behind a 2.1mm wide-angle lens. Gate edges, ghost branches, and ground texture snap into focus. Switch between PAL and NTSC via the onboard OSD menu. Fine-tune exposure with adjustable AGC (Low/Middle/High), D-WDR for backlit scenes, and 3DNR for low-noise image in dim conditions. This is the level of image control usually reserved for cameras twice the price.

0.001Lux Starlight. Fly When Others Land.
At 0.001 Lux minimum illumination, this camera sees in near-total darkness. Dusk parking garage sessions. Twilight proximity flying. Overcast forest runs. The Auto Day/Night mode seamlessly switches between color and monochrome as light fades, keeping you in the air long after standard cameras have surrendered to black.

1000mW of Adjustable Power. Pit Mode to Full Send.
Not every flight needs a full watt. The VTX offers five switchable power levels:
- 0mW (Pit Mode): Safe bench configuration. Zero interference to other pilots.
- 100mW (230mA): Proximity whoop racing and indoor flying.
- 200mW (290mA): General freestyle and park flying.
- 400mW (360mA): Moderate range and light obstacle penetration.
- 1000mW (490mA): Full power for long-range missions, dense forests, and concrete canyons.
Switch levels via the onboard button or remotely through SmartAudio from your Betaflight OSD. No landing. No disarming. No searching for a physical button buried inside your frame.

48 Channels. 6 Bands. Your Frequency Is Always Open.
Full A/B/C/D/E/R band coverage from 5362MHz to 5945MHz. Whether you're at a 40-pilot race or flying solo in the mountains, a clean channel is waiting. The included frequency chart makes manual selection straightforward, while SmartAudio handles automatic channel switching when connected to your flight controller.

Compact VTX. Full-Size Performance.
At just 30×26×6mm, this VTX fits builds where space is tight—3-inch toothpicks, compact cinewhoops, ultralight racers. The IPEX 4th generation interface keeps antenna connections secure and low-profile. Input voltage spans 7-26V (2S-6S) , with a clean 5V output to power your camera directly. No separate BEC. No extra wiring. One power source. One clean build.

D-WDR + 3DNR. Image Processing That Works.
- D-WDR (Digital Wide Dynamic Range): Balances bright sky and dark ground in a single frame. Fly toward the sun without losing the terrain below.
- 3DNR (3D Digital Noise Reduction): Cleans up low-light grain without smearing motion details. Sharp static objects. Smooth moving edges.
- BLC (Back Light Compensation): Automatically brightens shadowed subjects against bright backgrounds.
- AGC (Auto Gain Control): Three-level adjustable sensitivity for matching your flying environment.

Features

VTX:

* 1000MW MAX POWER – 5 LEVELS SWITCHABLE: 0mW Pit Mode / 100mW / 200mW / 400mW / 1000mW. From bench testing to long-range, dial the exact power your flight demands.

* SMART AUDIO + BUTTON CONTROL: Full remote configuration via Betaflight OSD UART. Physical button backup for standalone setups.

* 48CH FULL-BAND 5.8GHZ: Covers bands A/B/C/D/E/R from 5362-5945MHz. Never fight for a clean frequency.

* 7-26V WIDE INPUT: Direct 2S-6S LiPo connection. Built-in 5V output powers your camera—no separate BEC needed.

* 30×26×6MM ULTRA-COMPACT: Fits tight builds. IPEX 4th generation antenna interface for secure, low-profile connection.

* LOW CURRENT DRAW: 230mA @ 100mW to 490mA @ 1000mW. Efficient power management minimizes heat and maximizes flight time.

Camera:

* 1500TVL HIGH RESOLUTION: 1/3" CMOS sensor. 2.1mm lens. PAL/NTSC switchable via OSD. Razor-sharp analog clarity.

* 0.001LUX STARLIGHT SENSITIVITY: Auto Day/Night mode. Color during daylight. Crisp monochrome in near-total darkness. Fly when others are grounded.

* D-WDR + 3DNR + BLC: Full image processing suite. Balanced exposure in high-contrast scenes. Clean low-light footage without motion blur.

* FULL OSD MENU CONTROL: Onboard button access to AGC, WDR, DNR, BLC, Day/Night mode, and PAL/NTSC switching. Fine-tune your image without external tools.

* DC 5-30V WIDE VOLTAGE: Direct power from VTX 5V output or flight pack. No separate voltage regulator required.

* 6G ULTRALIGHT / 19×19MM: Standard nano camera mount. Fits toothpicks, whoops, and ultralight builds without weighing them down.

1000mW VTX User Manual Specifications:

VTX:

1500TVL Camera

Frequency Chart

VTX Wiring Pinout

Pin	Function	Connect To
GND	Ground	FC/Battery GND
5V Out	Camera Power	Camera 5V Input
Power In	7-26V Input	Battery Positive (2S-6S)
GND	Ground	FC/Battery GND
Smart Audio	UART Control	FC UART TX
Audio	Audio Input	Camera Audio Out (if supported)
Video	Video Input	Camera Video Out

Package Included:

1 x 1500TVL 1/3" CMOS FPV Camera (19×19mm, 2.1mm Lens)
1 x 1000mW 48CH 5.8GHz VTX Transmitter (IPEX, 30×26×6mm)