A part of the review has been auto-translated.
these have great fit to my ruler integrated T track easy to adjust and move quality items
I will consider cutting this in half, to use on the Drill bench guide. but 1m length with a built-in ruler will be very useful
The 1.2m rails as a product are ok, unfortunately, Bangood didn't use any protection for the rails and were bent and crushed in transit. They were wrapped in just thin plastic foil, sharp ends visible
Lovely conception, the mitter stops can be set up suitable for any configuration either inner or outer measurement. The materials are exceptionality well finished. I really advise this items. Delivered in 11 days. Priceless. Advise for the correct adjustment of the indexer: get a squared thin card to match the inner or outer face of the stop arm and then slide the indexer piece slightly snug up to the proper alignment of the index arrow with the card. The set up must be accomplished with the stop installed on the track of course.
elementi di buona fattura. l'unica cosa che la t-trak con la scala metrica risulta rovinata da un lato. A parte che hanno commesso uno sbaglio mandandomi la t-trak da 800 mm senza scala metrica mentre io avevo ordinato con la scala metrica.
плохо упаковали в пути кончик направляющей был деформирован . смотрите фото . И небольшой скол у стопора. Обидно . Только поэтому ставлю 4 звёзды.
Very good CNC-Quality Absolute correct dimensions Very good Aluminium-Quality Excellent black coating Very Good and save Packaging The Index-Needle is changeable from left to right For me a supreme-supllier - thanks a lot
Výborná pomôcka pre presné rezanie rovnakých kusov s nastavením dorazu.Kvalita dorazu ako aj lišty s mierkou je na vysokej úrovni.Doporučujem.
Przychodzi dość dokładnie zapakowany. Wykonanie bardzo schludne, napisy wyraźne. Ma spore możliwości konfiguracji, co jest mi na rękę, gdyż będzie wykorzystany w nietypowej aplikacji. Wszystko działa tak jak trzeba.
The product itself appears qualitatively very valid, too bad for the packaging, some little extra attention would have prevented the bar from arriving with the edges of one end bruised.... Then for goodness sake, someone might be indifferent, a perfectionist certainly not!... All in all, it is worth the money spent!