Nice printer. Actually came with the enclosure plexiglass which was a surprise to me. Few small issues though: 1. Left side plexiglass holes for the mounting screws didn't line up with the bottom rail, I had to drill new ones. 2. Front doors don't line up 100% so I gad to adjust those. 3. Touch screen didn't work, I had to take it apart and replugin the connector to get it to function. 4. Be careful with the plexiglass, don't over-tighten the bolts or you will crack it! Some things not mentioned on the site: Extruder is dual drive ! While the stepper motors are very quiet, the fans are noisier than my Ender-3 Overall this is a very nice upgrade over the Ender-3 I have, very happy so far but expect a few minor quality issues.

Nice printer. Actually came with the enclosure plexiglass which was a surprise to me. Few small issues though: 1. Left side plexiglass holes for the mounting screws didn't line up with the bottom rail, I had to drill new ones. 2. Front doors don't line up 100% so I gad to adjust those. 3. Touch screen didn't work, I had to take it apart and replugin the connector to get it to function. 4. Be careful with the plexiglass, don't over-tighten the bolts or you will crack it! Some things not mentioned on the site: Extruder is dual drive ! While the stepper motors are very quiet, the fans are noisier than my Ender-3 Overall this is a very nice upgrade over the Ender-3 I have, very happy so far but expect a few minor quality issues.

Nice printer. Actually came with the enclosure plexiglass which was a surprise to me. Few small issues though: 1. Left side plexiglass holes for the mounting screws didn't line up with the bottom rail, I had to drill new ones. 2. Front doors don't line up 100% so I gad to adjust those. 3. Touch screen didn't work, I had to take it apart and replugin the connector to get it to function. 4. Be careful with the plexiglass, don't over-tighten the bolts or you will crack it! Some things not mentioned on the site: Extruder is dual drive ! While the stepper motors are very quiet, the fans are noisier than my Ender-3 Overall this is a very nice upgrade over the Ender-3 I have, very happy so far but expect a few minor quality issues.

This really looks like a hammer, the bed is 290 x 290 mm big. Recording for BLTouch is already available. Important: For the connection via USB you have to buy a micro-usb cable and unscrew the bottom plate to get to the board.

Der sieht wirklich Hammer aus, das Bett ist 290 x 290 mm groß. Aufnahme für BLTouch ist bereits vorhanden. Wichtig: Für den Anschluss via USB müsst ihr nen Mikro-Usb Kabel kaufen und die Bodenplatte abschrauben um an das Board zu kommen.

This really looks like a hammer, the bed is 290 x 290 mm big. Recording for BLTouch is already available. Important: For the connection via USB you have to buy a micro-usb cable and unscrew the bottom plate to get to the board.

very nice, extremely good packaging. got some pictures, be really careful when putting the glass on. the ”feet” sticks out. see pictures. But a really really good produkt! very satisfied!

very nice, extremely good packaging. got some pictures, be really careful when putting the glass on. the ”feet” sticks out. see pictures. But a really really good produkt! very satisfied!

very nice, extremely good packaging. got some pictures, be really careful when putting the glass on. the ”feet” sticks out. see pictures. But a really really good produkt! very satisfied!

I received my printer today,it took exactly 6 days to arrive,I was impressed with the packaging,looked very professional.The printer feels professional as well,done my first print,very pleased with it

I received my printer today,it took exactly 6 days to arrive,I was impressed with the packaging,looked very professional.The printer feels professional as well,done my first print,very pleased with it

I received my printer today,it took exactly 6 days to arrive,I was impressed with the packaging,looked very professional.The printer feels professional as well,done my first print,very pleased with it

I received the printer very fast, in 3 days, the box did not arrive in very good condition, we had a problem with one of the parts that was in bad condition, and they are talking to the supplier to help us solve the problem and send us the 2 pieces that are wrong. On the other hand the product is easy to assemble, and although we are still in the testing phase we have printed some parts with PLA and it works very well. I think it's a good product, as I said, waiting to solve this small problem.

Recibí la impresora muy rápido, en 3 días, la caja no llego en muy buen estado, hemos tenido un problema con una de las piezas que estaba en mal estado, y están hablando con el proveedor para ayudarnos a resolver el problema y enviarnos las 2 piezas que están mal. Por otro lado el producto es fácil de montar, y aunque aun estamos en fase de pruebas hemos impreso algunas piezas con PLA y funciona muy bien. Creo que es un buen producto, como he comentado a la espera de resolver este pequeño problema.

I received the printer very fast, in 3 days, the box did not arrive in very good condition, we had a problem with one of the parts that was in bad condition, and they are talking to the supplier to help us solve the problem and send us the 2 pieces that are wrong. On the other hand the product is easy to assemble, and although we are still in the testing phase we have printed some parts with PLA and it works very well. I think it's a good product, as I said, waiting to solve this small problem.

It arrived in five working days. Despite the hits on the cardboard, the printer's fine. It took me, like, two and a half hours to put it together. Despite the small remedies. I can only recommend it.

5 munkanap alatt megérkezett. A kartonon lévő ütődések ellenére a nyomtatónak semmi baja. Olyan 2,5 óra alatt raktam össze. A kis orvosolható hibák ellenére. (a filament érzékelője gagyi). Csak is ajánlani tudom.

It arrived in five working days. Despite the hits on the cardboard, the printer's fine. It took me, like, two and a half hours to put it together. Despite the small remedies. I can only recommend it.

Lief alles bestens. Kartonage war zwar beschädigt aber innen alles top. Out of the Box dieses Benchy 120mm/s perfekt.

Lief alles bestens. Kartonage war zwar beschädigt aber innen alles top. Out of the Box dieses Benchy 120mm/s perfekt.

Lief alles bestens. Kartonage war zwar beschädigt aber innen alles top. Out of the Box dieses Benchy 120mm/s perfekt.

So far really pleased with the ender 6 and supprised this came with the enclosure too only hour or so build time and printing straight outta the box witch is nice

So far really pleased with the ender 6 and supprised this came with the enclosure too only hour or so build time and printing straight outta the box witch is nice

So far really pleased with the ender 6 and supprised this came with the enclosure too only hour or so build time and printing straight outta the box witch is nice

The printer arrived in 9 days from CZ warehouse. The package was slightly perforated but nothing seriously. The printer looks and feel very solid. Took me almost 2 hours to assemble it and perform a bed level. Did 3 test prints from the sd card that comes with the printer and the prints came out very good with out of the box configuration. Need to keep in mind that you have to do a bed leveling each time you print in order to achieve best results. A useful upgrade would be an ABL (auto bed leveling). All and all I'm very happy with my purchase! This printer can be so much more!

The printer arrived in 9 days from CZ warehouse. The package was slightly perforated but nothing seriously. The printer looks and feel very solid. Took me almost 2 hours to assemble it and perform a bed level. Did 3 test prints from the sd card that comes with the printer and the prints came out very good with out of the box configuration. Need to keep in mind that you have to do a bed leveling each time you print in order to achieve best results. A useful upgrade would be an ABL (auto bed leveling). All and all I'm very happy with my purchase! This printer can be so much more!

The printer arrived in 9 days from CZ warehouse. The package was slightly perforated but nothing seriously. The printer looks and feel very solid. Took me almost 2 hours to assemble it and perform a bed level. Did 3 test prints from the sd card that comes with the printer and the prints came out very good with out of the box configuration. Need to keep in mind that you have to do a bed leveling each time you print in order to achieve best results. A useful upgrade would be an ABL (auto bed leveling). All and all I'm very happy with my purchase! This printer can be so much more!

I have been amazed of the service offered by banggood delivery in 3 days and demoment everything working...now to adjust it!

Me he quedado alucinado de el servicio ofrecido por banggood entrega en 3 días y demomento todo funcionando...ahora a ajustarla!

I have been amazed of the service offered by banggood delivery in 3 days and demoment everything working...now to adjust it!