Customer Reviews

4.94 out of 5
Write a Review
  • All Reviews (1752)
  • Image (375)
  • Video (1)
  • All Star
    • All Star(1752)
    • 5 Star(1655)
    • 4 Star(90)
    • 3 Star(7)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
|
Show Original

A part of the review has been auto-translated.

  • 24/09/2020

    This is my first 3D printer. It comes very well packed. Instructions are clear and it's quite easy to assemble, eventually you will find tons of video of assembly, plus there is a big community around this printer, with advice and improvements. If I can give some advice : - The tools are provided, but if you are well equiped, use yours, always work with good tools. - Torque in a criss-cross pattern - Do not over torque - All axis should move smoothly, without play nor hard spot. - If you get hard spot or excessive play, check the belt tensioner and the excentric over the bearings - Bed leveling is way easier with a set of feeler gauges, I used 0.10 to 0.15mm I really appreciate that 60g of PLA was provided to make some trials. Easy to operate, I found a calibration model on thingiverse and printed it. I was very impressed by the quality and precision for a first print. Noise comes mostly from the hotend's fan and it is tolerable. To sum up, I highly recommend this printer.

    Comments (2)
    Show Original
  • 28/12/2020

    The product is excellent, in my opinion best buy, has an impressive print quality, the screen is user-friendly, in fact even reading the instructions was intuitive, while for the assembly I had some problems: the end of the Z axis I had put it too low, as a result I could not level the printing plate well as it collided against the stepper-motor behind, so after an hour I realized the problem, the second problem I found was that the bearings in some parts (hotend, printing plate) were too loose or too tight, I being a beginner did not know how to fix it (the print plane wobbled), as a result I turned to inthernet, for the rest apart these inconveniences I found it very well, also because the Nozzle heats up quickly, the plate a little less, the machine also has a convenient tool drawer, and knobs to tension the straps more easily, I recommend it as a 3D printer whether you are a beginner or an expert, but if you see that the top wobbles tighten it with the supplied key.

    Comments (1)
    Show Original
  • 02/08/2020

    The printer has a good quality, the frame is very stable and firm just like the Ender 3 Pro, easy to level the bed, super practical the belt tensioners, the 32bit board still learning to set up, As the printer is very new it still has its bugs in the firmware that still have to be fixed, but in the end the experience with this printer is very good.

    Comments (4)
    Show Original
  • 23/02/2021

    This is my first 3D printed and i can't be more happier! It took me 1 hour to assemble and adjust everything. The machine works perfect. For everyone who wants to buy a 3D printer: Go for it, you can't do nothing wrong. There are hundrets of videos and Tutorials in youtube für this Special printer.

    Comments (1)
    Show Original
  • 25/12/2020

    Excelent packaging. Very nice presentation and quality/price ratio. Does work already out of the box. My first 3D printer, satisfied with product, have probably over 50+ hours of printing time in first 2 weeks. Would recomend to buy, just be patient with bed leveling and clean bed for better adhesion.

    Comments (1)
    Show Original
  • VIP4
    IE
    19/08/2020

    Excellent 3d printer. Print quality is excellent, even at 0.2 res, using PLA. It is a pleasure to put together, thanks to the very good instruction manual. I love the colour LCD screen. Makes it very user friendly. Big upgrade compared to the ender 3 pro. Love this printer. Would recommend it to anyone.

    Comments (1)
    Show Original
  • 20/05/2021

    Very impressed. Easy to assemble (I found YouTube videos more helpful than the included manual) and I got rather good prints right from the start (again after following bed leveling advice from YouTube tutorials), using default settings for an Ender 3 in Cura on a Mac. Still have a lot to learn but I'm very pleased with the quality out of the box as a first time 3D printer user.

    Comments
    Show Original
  • 11/04/2021

    Le istruzioni presenti nella scatola sono in inglese, inoltre sulla pendrive c'è un video di come si monta la stampante. Il montaggio è abbastanza semplice, bisogna solo stare attenti alla perpendicolarità dei pezzi e all'allineamento della struttura. La qualità di stampa dipende molto dall'assemblaggio. Su internet ci sono diversi firmware custom che migliorano le prestazioni della stampante. La stampante che ho ricevuto monta la scheda madre 4.2.2 e non la 4.2.7. Ho avuto un piccolo problema con un cavetto che era danneggiato e mi è stato inviato subito un cavetto sostitutivo, ottimo servizio assistenza. Conviene sostituire subito le molle originali del letto di stampa poichè sono troppo morbide e la stampante perde facilmente il livellamento. Ottimo il fatto che nella confezione sia presente anche un pò di filamento per provare subito la stampante. Su internet si trovano diversi file da stampare per vedere se la stampante è stampa correttamente o ha problemi sulla meccanica o sulle impostazioni di stampa. Consiglio l'acquisto. A questo prezzo non si trovano stampanti che stampano così accuratamente.

    Comments
    Show Original
  • 24/03/2021

    i have fixid and checked all details. when i give electricity power supply is blowed up. 230 volt switch was open but when i open it, it blowed up. how is possible. i will share it all my network. now i need to new power supply. i have shared this site with my director friends for shopping but they gave up because this trouble

    Comments
    Show Original
  • 11/03/2021

    I purchased this 3D printer pursuing a hobby but could easily turn into a business. After extensive research I found that the Creality Ender 3 v2 is the best option for the money as a beginner. Delivery: Previously I had a problem that Banggood shipped the wrong item for me instead of the 3D printer so I reached out to them and their customer service was excellent and refunded my money and I reordered and within a week it has been delivered to my doorstep. (Note: Tracking sometimes doesn't show updates, if so copy the tracking number and put it in the tracking website. It will show the exact location of the item). Price: ~300$ including taxes and shipping is big plus. Product: I'm very impressed. To assemble the printer please be careful with every step because its very important to level everything and tighten all the bolts like instructed (There are detailed YouTube videos for that) and take your time,, no rush. Using the printer is straight forward with the beautiful colored screen but you will need a Micro SD card (Mine didn't come with it. however, some people got it). To connect it to your computer use USB-A to USB-B Mini and open any 3D printing program you like, I used Cura and my printer wasn't detected. Make sure to update all your drivers and install any drivers for the printer if needed. After exploring Thingeverse I downloaded models and started playing with settings for the PLA Filament (a white sample is provided with the printer) I set mine to the default recommended settings by Cura but I increased the Bed temperature to 70c. Bed leveling: most crucial part. I advise to buy the stronger yellow spring with the printer, using the A4 paper method will work perfectly. Lots of videos are available on YouTube. After that just insert the Filament, slice your model, and happy printing. *I added Creality Box wifi and I can print from my phone and stop and resume the print anytime I'm pleased with my purchase and I have a long way to go.

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • US$206.00
    • US$179.00
    • US$261.99
    • US$18.99
    • US$399.00
    • US$299.00
    • US$129.99
    • US$219.99
    • US$579.00
    • US$19.99
    • US$7.99
    • US$39.92
    • US$6.99
    • US$9.99
    • US$49.99
    • US$17.99
    • US$4.99
    • US$51.99