Customer Reviews

4.83 out of 5
Write a Review
  • All Reviews (179)
  • Image (36)
  • Video (2)
  • All Star
    • All Star(179)
    • 5 Star(163)
    • 4 Star(8)
    • 3 Star(4)
    • 2 Star(2)
    • 1 Star(2)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
|
Show Original

A part of the review has been auto-translated.

  • 08/01/2018

    I purchased this as my first 3D printer after selecting it by watching YouTube reviews. It arrived well-packed, and requiring little assembly work. However, I feel that the written instructions are not comprehensive enough. The best guide to initial set-up and testing I found in this 11min video: https://www.youtube.com/watch?v=Cdkb_ILCptw All the tools required are provided. I was surprised that the fine nozzle-cleaner was loose in the box, and I nearly threw it away by mistake. The photos show the test-piece being printed from the SD-card supplied. Note the four corner-squares of masking tape, which I used to set the clearance between the hot-bed and the nozzle once I'd disabled the stepper motors. There is very little clearance-gap between the z-axis lead-screw and the filament incoming to the extruder. I loosened the four bolts for the extruder stepper, and twisted it clockwise whilst I re-tightened them in order to make this gap as large as possible. I might change this arrangement by making a bracket to hold the filament slightly further away. The larger picture shows my supply of PLA reels in 19-ltr Really-Useful boxes on the shelf above. Each box contains a large container of deliquescent crystals to lower humidity. Although the motor noise is bearable, I aim to build a polycarbonate enclosure around my printer. This will also help keep the ambient temperature high enough to print ABS.

    Comments (1)
    Show Original
  • 18/05/2018

    Hola gracias la maquina llego entera sin golpes ni daños, lo unico que a los que compren la maquina deberan desarmar la central y ajustar tornillos en mi caso vinieron flojos los tornillos de placa y coolers, despues todo genial. Arme todo facil y mande a imprmir sin tocar nada y excelente impresion tocando configuraciones quedara genial.- Me demoro 1 mes y medio para llegar a jujuy argentina con el envio normal, supongo que con el otro seria mas rapido.- Gracias por la atencion excelente..

    Comments
    Show Original
  • 14/05/2018

    expect to pay arnd12% tax. i got it for arnd 17k php on banggood and paid arnd. 2.5k php for custom tax >< it is creality so it is quality. good print out of the box. great 1st 3d printer for the print size and print quality. satisfied😎

    Comments (1)
    Show Original
  • 27/03/2018

    Great looking machine that went together with ease after reviewing a few youtube videos. X-axis was over tightened and y axis was a little loos otherwise I didn’t do any adjustments. Bed was slightly uneven making it a bit diffucult leveling the bed for a beginner like me. I was quite unhappy though when I realized the controller unit was dead when I plugged in the power. However after removing the cover of the controller I quickly found one of the power connectors coming loos in transport. I reattached it and tightened the other connectors as well and then it started working. Printed directly on the glass with some gluestick applied. Initially had issues with the PLA coming loose but after lowering the fan speed (50%) and making the bed slightly hotter (56 degree) it worked fine. I was printing in my cellar with a ambient room temp of ~17 degrees C so it was too cool with the defaults is my take on it. The cat came out nice with some minor artefacts most likely related to temperature tuning but overall quite impressive.

    Comments (1)
    Show Original
  • 12/03/2018

    I was initially disappointed when the item was not shipped within 24 hours as indicated. However, the shipping company did a great job to have it delivered in 3 business days after that (from China to Singapore). Apart from a few dented corners on the box, the item was delivered in good condition. I'll have to say the packing was impeccable, well padded on every side. The printer was tested to be in perfect working condition, and the print quality was beyond my expectation. The manual was rather lacking though. On the "Assembly" and "Package Contents" pages, it shows a "T-Bracket (Right)" and "Decorative Trim". Upon checking with other CR-10 mini owners on the support group, they did not get those too. It's either they consistently left those out, or they were just not part of the package. Overall, it's a satisfactory purchase. Well, above average to be honest.

    Comments
    Show Original
  • 15/10/2017

    This 3D printer is easy to assembe, just screw the two frames together and tighten all the screws, then adjust the eccentric screws. Comes with nice selection of tools etc. and also spool of white PLA so you can start printing immediately after assembling. Installation instructions are not the best, but you can find plenty of installation videos of this and the larger sibling: Cr-10. Overall this is a great printer and the print quality is very nice.

    Comments
    Show Original
  • 30/05/2018

    + Well its also my second printer, so not many to compare against.. + It does not take 5 minutes to assemble, but about 2 hours if you do it checking every detail. + Every cable comes perfectly labeled. - Instructions are not really useful, but you can find better ones online, I used this video: https://youtu.be/shTw9C-_BHM I still need to configure a slicer, but after assembling and leveling the printer the cat model available for testing came out PERFECT. I printed it on the glass plate, and needed to heat the bed to 60, instead of the 45 configured in the gcode. To do this, from the menu hit the bed to 60, once it gets there Start the cat.gcode print available in the sd card, once it started, Set the bed temperature to 60 again from the menu.

    Comments
    Show Original
  • 14/05/2018

    expect to pay arnd12% tax. i got it for arnd 17k php on banggood and paid arnd. 2.5k php for custom tax >< it is creality so it is quality. good print out of the box. great 1st 3d printer for the print size and print quality. satisfied😎

    Comments
    Show Original
  • 22/02/2018

    superbe imprimante , matériel de très bonne qualités mes premières impressions 3D sans aucun problème le prix et très intéressant fourni avec l'outillage adaptateur usb et carte SD de 8GO,1 rouleau de PLA franchement très bien Merci Banggood

    Comments
    Show Original
  • 07/01/2018

    it is bean great . a have made a few pieces with onshape the last few days and they came all perfect with no problems. the only regret i should have order filaments with my initial order

    Comments (1)
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • US$206.00
    • US$179.00
    • US$409.99
    • US$18.99
    • US$499.00
    • US$499.99
    • US$5.99
    • US$261.99
    • US$449.99
    • US$255.00
    • US$39.92
    • US$7.99
    • US$19.99
    • US$129.99
    • US$17.99
    • US$259.00
    • US$9.99
    • US$45.99