Customer Reviews

4.93 out of 5
Write a Review
  • All Reviews (1253)
  • Image (255)
  • Video (3)
  • All Star
    • All Star(1253)
    • 5 Star(1177)
    • 4 Star(66)
    • 3 Star(9)
    • 2 Star(0)
    • 1 Star(1)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
|
Show Original

A part of the review has been auto-translated.

  • 14/01/2021

    Great printer. My first printer. Shipped from Spain and arrived in Italy in 5 days (including a festive one). It arrives pre-assembled, and easy to assemble. Before choosing it I saw a lot of videos and reviews and I have to say that so far I made the right choice. It has the TMC2100 (they are not the last but quiet and they are fine) the fans in general are moderately quiet. The 220 plate heats up in a few seconds and when you cool the moulded piece immediately comes off (you have to do some practice with manual leveling and slicer parameters, at first it might seem difficult, you will throw a lot of thread if you are a beginner like me, but after various experiments and tips from social media you get there). My kids are having fun printing everything. The only thing that bothered me is that in the pictures she looks ready for car bed leveling, in reality the machine arrives without a firmware with this function (you have to update from unofficial firmware gives what I understand) and you have to add a support that the house does not provide (you have to print it you but do not say what to print) and when I challenged this thing to the customer service (I understand that not insert the piece for the ABL but at least give the support), After several emails in which they could not understand, they replied that the machine never had the ABL (I let it go is like talking to a wall). Unfortunately forget a customer service that is able to solve or make you through with the mother company, Banggood on this still has much to improve. In conclusion I recommend this product, only evaluate if you can do without Banggood customer service before buying.

    Comments (10)
    Show Original
  • 24/03/2021

    Really good printer. Maximum perfection in details, easy to use and very intuitive. Among its advantages the glass plate that allows objects to be removed with ease. Very quiet. Gentile sellers and always available to answer all questions. The only problem I had to pay 37 euros of customs despite having chosen to receive it from Spain

    Comments (1)
    Show Original
  • 10/03/2021

    I searched for a good printer (my first printer) at a low budget and it is quite impressive how good it works ... the packaging is very good, the printer itself is quite easy to install and use . I used tingiverse file and cura for slicer it have the correct preset for the printer (only printhead settings for sequential printing are incorrect)... I started with the test cube included in the USB pen, it sticked too hard to the hotbed and bad layer adhesion (the pla I got needed higher temperature I found It out later when I printed a temp tower) results braking it also ecause there is no spatula included !!! no test filament included so buy it if you whant to use your new printer 🤣 some minor imperfections in plastic parts but unnoticeable and doesn't influence the hardware... so as my absolute first 3d Printer and totally new in this world I can definitely suggest to buy this printer! I am really satisfied with it and enjoying the learning progress... btw first 2 weeks owning it has been a non stop testing and printing ✌🏼 I included a picture of the hotbed rails I printed because it could be usefull to prevent hot bed cable braking it is a good way to learn sequential printing when you need many parts in one print ;)

    Comments (2)
    Show Original
  • 17/11/2020

    made the purchase from Colombia and was delayed in arriving a little more than two months as it happened to make a change of store, in that time the banggood service was excellent, they always responded, the printer arrived in perfect condition, very well packaged. The performance of the machine remains to be seen. 👍👍👍

    Comments (3)
    Show Original
  • VIP3
    ES
    01/05/2021

    This negative calification is not for the product, the product arrived with a X axis end-stop sensor broken and I can't check the printer functionality from 8 days ago and I can understand this happens. The negative calification is for banggood as a company, nothing resolutive. Waiting 8 days and I don't have any solution to my problem yet. I'm sure this is the last time buying in banggood from my side. The printer looks very well.

    Comments (4)
    Show Original
  • 09/02/2021

    From neophyte ordered this as the first 3d printer arrived the 3 working days hyper fast packaging intact, simplicity of assembly less than 10 minutes calibrated several times at least 3 possibly with hot plate and even uggello. What about or tried the first test print of the cube came out perfect compliments to the manufacturer and also to Banggood for the great price offered.

    Comments (2)
    Show Original
  • 28/12/2020

    It took exactly what the site said, I ordered it on November 10 and it arrived on December 24 but I went to pick it up today. They charged me $1,900 pesos in taxes, which I had to pay in person at the Post MEX office in my city to get it delivered to me. The printer came in perfect condition and prints pretty well.

    Comments (1)
    Show Original
  • 13/10/2020

    Easy installation, quick adjustment, well packed. It is my first printer and I was surprised by its intuitive operation and robustness. I lack practice and finish adjusting the printer (tools and spare parts included), but the first day I managed to print a couple of figures. I had problems with the delivery address (more than 35 characters) and the order was blocked, but I solved it with an e-mail. Very satisfied with the purchase.

    Comments (1)
    Show Original
  • 07/08/2020

    a perfectly packed and presented packaging. Bring a case with a large number of spare parts and tools. The printer, it comes pre-assembled, just put 4 screws and 3 connectors. In my case, all the pulleys and the stage were fully adjusted. Within 10 minutes, it was assembled, calibrated and printing.

    Comments (1)
    Show Original
  • 26/11/2020

    the best 3d printer i've ever had!! i've had dagoma, ender 3, cr10,.. I hesitated with her older sister for a long time, but the surface is perfect for me. The possibilities of adjustments from the screen are top, the wire changes are simplified, the tray adjustment is childish, the noise is very low. I print mostly in PLA: normal, carbon, wood, everything goes there. The quality is excellent. I use IdeaMaker in slicer for its much better possibilities than Cura. I also bought a better quality heatbreak as well as special nozzles and told me that at the first signs of wear, I will change... but it's... do not hesitate to order this marvel!

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • US$399.00
    • US$206.00
    • US$194.00
    • US$18.99
    • US$17.99
    • US$229.99
    • US$255.00
    • US$199.00
    • US$299.99
    • US$261.99
    • US$129.99
    • US$39.92
    • US$7.99
    • US$145.99
    • US$19.99
    • US$4.99
    • US$6.99
    • US$14.99