Customer Reviews

4.95 out of 5
See all 1533 reviews
Write a Review
  • All Reviews (1533)
  • Image (188)
  • Video (5)
  • All Star
    • All Star(1533)
    • 5 Star(1475)
    • 4 Star(51)
    • 3 Star(2)
    • 2 Star(2)
    • 1 Star(3)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
|
Show Original

A part of the review has been auto-translated.

  • 10/02/2021

    Delivery from RU warehouse via IML took 5 days. The motors fit the description, the only thing is that the actual length of the shaft is slightly different. 775 motor has shaft length: 16 mm, diameter: 5 mm; RS-550 has shaft length: 9.5 mm, diameter: 3 mm. On the pictures: top 775 motors, bottom, RS-550.

    Comments
    Show Original
  • 24/11/2019

    These are some very cheap very powerfull very robust motors. I use them in a lot of projects. I made 2 Servo's/actuators with them. Video's can be found here: 3D-printed linear actuator -> https://youtu.be/99aw_77oUvY 3D-printed high torque servo/gear reduction -> https://youtu.be/8sq4pHdSXYM

    Comments (2)
    Show Original
  • 15/07/2019

    мотор просто огромный. свои обороты похоже что выдает, но при торможении пальцами немного тормозится спереди подшипник, сзади втулка, все как в описании. хороший мотор, рекомендую. Ехал из России дошел EML за 10 дней.

    Comments
    Show Original
  • 15/04/2019

    The engine delivered well and fast enough. I tried it right away - it starts spinning at 0.7V and I tested it up to 30V You can look at RPM for several measurements. I am very satisfied width it, only the engine running is a bit irregular and is also quite noisy. I'll use it to drive a small table saw.

    Comments
    Show Original
  • 01/12/2017

    Packaging is not so secure as expected wraping only with foam and plastic bag. I ordered 4 motors ... two of them, their shafts can be easily winded by hand but not for the other two that need pliers to turn the rotors.. All motors work fine with 12 Vdc (I don't have other tools to test their characteristics by now).

    Comments
    Show Original
  • 19/07/2017

    Отличный и мощный электродвигатель имеет толстый вал 5 мм с переди посажен на подшипник 625Z ,а сзади на подшипник латунный. Также имеются отверстия для крепления М4.Отлично подходит для изготовления мини станочков, цена меньше чем в других магазинах.

    Comments
    Show Original
  • 23/03/2018

    Хороший и качественный 775 двигатель. Быстрая доставка и качественная упаковка . Большое спасибо !Рекомендую всем!

    Comments (1)
    Show Original
  • 24/11/2019

    The amount of power that comes out of these thing is incredible. I made 2 3D-printed servo's/actuators with them and they are very powerfull. You can check them out here: 3D-printed high torque servo/gear reduction -> https://youtu.be/8sq4pHdSXYM 3D-printed linear actuator -> https://youtu.be/99aw_77oUvY

    Comments
    Show Original
  • 26/03/2019

    Двигатель довольно-таки мощный для своих габаритов. На холостом ходу потребляет немного (меньше полампера), но при повышении нагрузки на ось соответственно повышается и ток потребления.Принесли прямо домой через 7 дней после заказа.

    Comments
    Show Original
  • 05/01/2018

    The product is same as described. It is suitable for my diy works and the price is low. I Am very happy with it. About packing : Take little more attention in packing because when i open the cover the protective sponge is slipped from the motor while transporting the guys did not take the parcel carefully they take and throw the parcel. Thanks banggood

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • US$22.99
    • US$10.99
    • US$43.99
    • US$22.99
    • US$13.99
    • US$8.99
    • US$11.99
    • US$13.99
    • US$15.99
    • US$11.99
    • US$8.99
    • US$12.99
    • US$149.00
    • US$11.99
    • US$20.99
    • US$14.99
    • US$7.99
    • US$6.99