Customer Reviews

4.83 out of 5
See all 69 reviews
Write a Review
  • All Reviews (69)
  • Image (9)
  • Video (0)
  • All Star
    • All Star(69)
    • 5 Star(59)
    • 4 Star(8)
    • 3 Star(2)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
|
Show Original

A part of the review has been auto-translated.

  • phlux0r
    NZ
    09/05/2018

    No manual and schema is not useful for assembly. YouTube video is OK but no instruction for making LED mesh jig so see pictures here how to make this and put the cube together easily. Hope it helps. Note I got the blue-red version but it should be the same for the other.

    Comments (4)
    Show Original
  • 07/04/2018

    Poor pictures but will help with no instructions. You do not need the parts that are not shown on the board.

    Comments (1)
    Show Original
  • 12/03/2017

    I full agree with Zefbot. This is a very nice kit for cube-starters. There are no surprises here. Just fit the components that are supplied, and that should work. The PCB is built for two different types of processors. The one supplied here is the LARGE STC15W, which does the job very fine. However the PCB has space another chip. Do not worry. It just means that the very same PCB can be used in a factory with professional welding machines. There is no manual. There should be one, let's be serious. Now I built several cubes by now, so I know the drill. Value for price is ... almost OK. Do not mount the speaker; the sound is horrible. I subtract one for the appearance because the P1 and P2 (connections to layers) is on the front side. Or otherwise, the power connector/power switch is on the front side. All should be on the back side!! I included two pictures: a) One row mounted. The picture clearly shows everything working, and how to connect the LAYERS. b) A homebrew template, to help get the perfect distance for the welding of the LED's. I have not yet tried to reprogram the chip.

    Comments
    Show Original
  • 23/01/2020

    Great pastime quality exercising components is worth the challenge.

    Comments
    Show Original
  • 17/04/2017

    well, I FIND VERY GOOD ITEM TO LEARNING ASSEMBLY AND HOW IT WORK PLUS LEARN MORE ELECTRONIC EVERYDAY,THANK YOU.

    Comments
    Show Original
  • 06/03/2017

    Good idea to try something like this before attempting an 8x8x8.

    Comments
    Show Original
  • 21/01/2020

    Very good product with instructions for assembly. I haven't finished putting it together yet, but you're too interested to see a good result.

    Comments
    Show Original
  • 17/11/2019

    It was a fun project to put together. It took a long time. I checked every LED after I soldered it as I went along, but they all worked perfectly. They included a couple extra LEDs in case you mess up. If you build a template with the supplied perfboard, it goes a lot quicker. I used different jumper wire for the cathode layers, since the supplied wire seemed a little small. Some people are annoyed by the music, but I like having the option and you can just turn it off with the remote if you don't want it.

    Comments
    Show Original
  • 27/06/2019

    schön anzusehen

    Comments
    Show Original
  • 13/04/2019

    belum di coba

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go
    recommendation for you
    • US$2.99
    • US$13.99
    • US$4.99
    • US$29.99
    • US$6.99
    • US$3.54
    • US$5.99
    • US$9.99
    • US$3.40
    • US$1.99
    • US$13.99
    • US$22.99
    • US$15.99
    • US$2.99
    • US$11.99
    • US$29.99
    • US$13.35
    • US$0.99