Compatibility
To confirm that this part fits your vehicle, please enter your vehicle's details below.
-
Year:
-
Make:
-
Model:
-
Submodel:
-
Trim:
-
Engine:
- Clear All
This part is compatible with 0 vehicle(s).
Show all compatible vehicles
This part is compatible with 1 vehicle(s) matching
This part is not compatible with
- Year
- Make
- Model
- Submodel
- Trim
- Engine
Notice: Upgrade F7 Flight Controller to V2 new Version.
Will send new version.
July 28th, 2020
Diffirence:
1. IMU: MPU6000 only.
2. Also has DJI HD OSD. ( Only betaflight osd old version)
3. 10V 2.5A BEC Output ( 9V 3A old version)
4. 40x40mm External Dimension (30.5x30.5mm old version)
5. Designed the LED installation position in the four corners
6. has wireless Bluetooth parameter modulation
7. Type-C connection port
8. More clean and beautiful borad design & Reduce interference
July 28th, 2020
Specification:
Brand Name: HIFIONRC
Item Name: 30.5x30.5mm F7 OSD Flight Controller & 60A 4in1 ESC Stack
F722Pro V2 F7 OSD Flight Controller
MCU: STM32F722RGT6 216MHz
IMU: MPU6000
OSD: Betaflight SPI OSD & DJI HD OSD (UART6)
UART: UART 1/2/3/4/5/6
BEC Output: 5V 3A & 10V 2.5A ( supports stable power supply for DJI HD and high-power analog graph transmission)
Input Voltage: 3-6S Lipo
Blackbox: 16MB
Firmware: HIFIONRC F7
LED: 4 Ways independent LED Pad, support WS2812 Programable LED
Dimension: 40x40mm
Mounting Hole: 30.5x30.5mm, M4
Weight: 7g
- Onboard Voltage Sensor
- Support SBUS, CRSF, IBUS, Spektrum 1024/2048, XBUS, SumD & SumH Receiver, Built-in inverter
- Support Support 3.3V Satellite Receiver ; PPM Receiver
60A BLheli_32 32bits 4In1 ESC
Input Voltage: 3-6S Lipo
Con. Current: 60A
Burst Current: 65A (5S)
MCU: STM32F051, 48MHz
Firmware: BLheli_32
-Onboard Current Sensor
- Support DShot300-1200, Proshot1000, Oneshot, Multishot, PWM
Mounting Hole: 30.5x30.5mm, M4
Weight: 12g
Features:
- has wireless Bluetooth parameter modulation, and the UART used for bluetooth parameter modulation is UART4_MSP，
The Bluetooth signal is isolated and does not interfere with the receiver and the rest of the equipment
(If we don't find the bluetooth antenna, don't worry, we hid it)
- This FC includes a DJI HD cable in default.
If you use DJI HD, this means you don't need to buy a separate FC and DJI HD cable.
Don't worry if you're using a traditional Video TX.
- The flight controller comes with an AT7456 chip, allowing you to still use OSD functionality.
- The STM32F722 MCU has a built-in inverter, so the receiver can be installed in any RX.
Used when opening the corresponding UART serial digital receiver (default is RX2_UART2).
Click here buy separate replace F722 Pro F7 Flight Controller Board.
Click here buy separate replace 60A BLheli_32 4In1 ESC
Package Included:
1x F722Pro V2 F7 Flight Controller
1x 60A BL_32 4in1 ESC
1x Capacitor
1x Connection Cable
1x Power Cable
1x bag of Screws
