Uma parte da revisão foi traduzida automaticamente.
Have not had a single Jam in this hot end. After designing and printing all the parts needed to mount it to my Prusa i3, I went ahead and installed it. Never going back, and should order another one soon for dual extrusion. The nozzle it comes with has a very flat tip, i prefer more pointy to get more detail as this one does not handle overhangs and fine layers too well. I got the short version, so with my own adapter I could choose between direct drive or Bowden. Stock cooling works perfectly, printing ABS at 245 degrees and PLA at 200, longest print without problem so far was 5 hours. In the meanwhile I've added nozzle cooling and a larger extensive extruder base.
I was pleasantly surprised to receive a "complete" kit that included not only the hot end but the 4mm Teflon tubing as well as a fitting on the other end of the tubing. See photos. The machining, fit and finish, of the heat sink and the heater block are very good. The fitting on the far end of the tubing appears to have an M6 thread. This appears to be a good buy for my 3D printer build.
Item arrived in good time. packaging was ok could have done with a bit more rigidity. Not have a full metal heat break as you would expect it to be with the title. It has a PTFE insert. If you want to do higher heats you will need to grab a different heat break. Now I have to wait for full metal heat break to arrive. not getting it from Banggood as I need the item faster. If you order one of these grab this as well.http://www.banggood.com/Inner-Bore-4_1MM-Modified-Version-E3D-V6-All-Metal-Hot-End-Stainless-Steel-Pipes-For-3D-Printer-Accessories-p-1023433.html?rmmds=mywishlist
attenzione!!! l'estrusore non è quello in foto! manca la filettatura per il connettore del tubo teflon!
Esta não é a primeira vez que compro o produto e estou muito satisfeito com a qualidade do produto e da impressão, o E3Dv6 é o melhor cabeçote para a impressora 3D
I edited them more pieces on the 3D printers and are quite accurate.
Ordinato nella versione bowden 1.75 mm. Arrivato completo di fitting, ventola, termistore da 100K e cartuccia riscaldante (non compreso il tubo in PTFE). Hotend con PTFE nella gola (NON all-metal). Testato a lungo si è dimostrato perfettamente funzionante. Consigliato.
Order the long version and it came with a PTFE Extension Tube, same as other users Well packed and quite fast to deliver.
Nice extruder, but not all metal. Good deal! Thanks
Todo excelente, las medidas justas y exacta la descripción todo llego listo para instalar y utilizar