1806 2400kv motore mini brushless CW / CCW per qav250 FPV
Una parte della recensione è stata tradotta automaticamente.
Great motor for the price 350g of thrust,,69Watts with a 5x3 prop,,.
Ordered 4 of these motors for my first build MSR quad,,, With 350g of thrust and 69Watts with a 5x3 prop it's fast enough for a newbie to handle...Recomended 5 STARS allround..
if you are looking for a replacement motor like me, and bought it for the motor on the picture be advised it is NOT the same motor, it has 1806 2400kv, but design is slightly different and it spinns very easy. havent tested them yet but seems ok. But make sure to check for rotation CCW means thread so CCW is CW motor direction!
I already own 4 of these motors for a QAV280 quadcopter. peak power and thrust for my setup are 5x4x3 props with 11.1v lipo. With proper tuning they stay slightly warm. I did have to change the ESC refresh rate to 400Hz so that all 4 motors spin properly.
Use with Kingkong 12A ESC. Rotation quickly and nice response.
Ich hatte ihn mir als Ersatzmotor bestellt, aber er ist nicht baugleich mit den in Deutschland bestellten.
awesome motors for a cheap build :)
Плохое крепление ротора. после 10 полетов ротор отваливается. Для замены - использую 2мм сверло. вытачиваю паз под фиксатор. The bad rotor mount. After 10 flights the rotor fall off. To replace - using 2mm drill bit. grind out a groove under retainer
Плохое крепление ротора. после 10 полетов ротор отваливается. Для замены - использую 2мм сверло. вытачиваю паз под фиксатор. The bad rotor mount. After 10 flights the rotor fall off. To replace - using 2mm drill bit. grind out a groove under retainer
Плохое крепление ротора. после 10 полетов ротор отваливается. Для замены - использую 2мм сверло. вытачиваю паз под фиксатор. The bad rotor mount. After 10 flights the rotor fall off. To replace - using 2mm drill bit. grind out a groove under retainer