Avis des clients

Ecrire un commentaire
  • Tous les Commentaires (168)
  • Image (13)
  • Vidéo (2)
  • Toutes les Étoiles
    • Toutes les Étoiles(168)
    • 5 Étoile(157)
    • 4 Étoile(8)
    • 3 Étoile(2)
    • 2 Étoile(0)
    • 1 Étoile(1)
Trier par:
Commentaire Top
  • Commentaire Top
  • Le plus utile
  • Le plus récent
Avis uniquement de votre pays (United States)
|
Afficher l'original

Une partie de la critique a été traduite automatiquement.

  • 24/11/2016

    This works great, although to access the "sensitivity" and "time" screw dials you need to pry open the plastic case (GENTLY) and then snap it back together. I drilled holes in the back and used a marker to label each (after I painted the case white). Also to save anyone some time, anti-clockwise is the minimum setting for these dials, clockwise the max, it's not marked, it needs a small philips head screwdriver to turn the dials, also this orientation I describe is applicable when looking at the back of the unit with the cables hanging down from the bottom. Also be sure to mark down on the back of the case the input and output cables, this is only marked on the PCB and I'm not sure what would happen if you wired it up backwards after putting it all back together and forgot which cable was which. All in all it works great. I use mine in the kitchen with LED lights and I sprayed the casing white (yes you can take the sensor/PCB out of the casing completely) so it would match my kitchen and look good, etc. When I installed it I just used a bit of stick on velcro at attach it to the upper kickboard near the ceiling so I can take it off and adjust the dials if I want, this thing weighs nearly nothing so velcro is fine, also the little side screw points are nearly useless because they are so small so it's probably worth just cutting them off. For the dials, I ended up having mine set on a quarter turn off maximum, this gives about 4 meter range and 5 minutes on time. On max settings it picks up movement at about 6-7 meters and stays on about 10 minutes. The minimum settings are about 1 meter and 20 seconds. I've been running about 4.5 amps through this for about 2 weeks now (for about 4 hours per day) and no problems, I bought a 5amp strip but didn't use it all so I reckon it's about 4.5 amps for me. Also, if anyone's interested, I used an old computer power supply to run the LED's, if you have some spares or just some old PC then you could use the PS for this, they work great and provide plenty of power for this application, it's hard to find a PS that provides 12v and > 4 amps, you can google how to do it easy enough, I didn't even cut any cables or open the power supply case for this job although you can which makes it all much neater. Hope all this detail helps someone, cheers.

    Commentaires
    Afficher l'original
  • 14/01/2017

    These sensors work very well. You have to open them up and adjust the range and duration. Checkout my video under videos on here.

    Commentaires
    Afficher l'original
  • 24/07/2015

    Das Gehäuse sollte zur Inbetriebnahme mit kleinem Schlitzschraubendreher unten aufgehebelt werden, da sich auf der Platine 2 Potentiometer befinden, an denen die Dauer und die Empfindlichkeit eingestellt werden können (Standard ist je auf Minimum eingestellt). Der Schaltvorgang findet geräuschlos statt! Das System ist kompatibel zu den 12V LED Stripe Controllern, ich verwende sie mit dem Mi Light Funkcontroller und 5m RGB Stripe 5050. Die beiliegenden Stecker sind praktisch, allerdings war eine Schraube nicht verwendbar, da das Gewinde defekt war.

    Commentaires (1)
    Afficher l'original
  • 16/01/2017

    Without rele, only electronic. I hope it can stand cont. 5A as promised. Must open to set two potetiometers (time and sensitivity). I really don't know why they didn't leave two holes for this. You can do that like in photo below. Great for led stipes. Noiselessly!

    Commentaires
    Afficher l'original
  • 12/11/2016

    ceux-ci mon servis pour l'éclairage de mon dressing sur la détection de l'ouverture des portes couplet avec des bandeau de led trouvé ici et transformateur parfait. On peux régler la sensibilité et le timer. je recommande.

    Commentaires
    Afficher l'original
  • 09/03/2018

    very small unit but so sensitive, can adjust how long the light stays on for.

    Commentaires
    Afficher l'original
  • 04/07/2016

    Deze komen zeer goed van pas bij de drinkbakken van de poezen zodat die nooit meer nutteloos staan te draaien . Wat bovendien een goede besparing oplevert en bovendien gaat de motor nu veel langer meer !!! Super Bang-good.com . Voor de snelle levering !

    Commentaires
    Afficher l'original
  • 31/07/2019

    Good product. It does what it supposed to do.

    Commentaires
    Afficher l'original
  • 25/01/2019

    De acordo com o pedido

    Commentaires
    Afficher l'original
  • 16/09/2017

    Very good product. I recommend

    Commentaires
    Afficher l'original
Show:

    Total 0 pages

    Aller à la page

    recommendation for you
    • US$9.71
    • US$9.89
    • US$20.99
    • US$5.67
    • US$23.99
    • US$9.99
    • US$5.43
    • US$5.90
    • US$3.15
    • US$5.10
    • US$3.00
    • US$4.31