Bausatz für intelligenten Roboter-Auto-Tracking-Linie mit Reduktionsmotor
Ein Teil der Rezension wurde automatisch übersetzt.
Este es una versión nueva o algo asi supongo la placa es azul el soporte de pilas es AAA y los LDR no tienen el capuchón negro, es facil de montar sobre todo si quieres practicar la soldaduras, importante respetar la polaridad de los motores, el punto de soldadura que esta al lado de las letras M1 y M2 es el positivo. Por ultimo si solo gira en un sentido tenéis que ajustar los pontenciometros azules que están al lado del interruptor
Good quality product, the packaging should only be safer, since everything came in a bag and some components were not antistatic bag.
Gutes kam bald an, montieren und testen
Посылка дошла в целости и сохранности. Сборка заняла около 2-х часов. Заработал сразу. Ездит по нарисованной трассе. (см. фото)
ótimo produto muito bom para pequenos projetos recomendo
Das ist ein sehr schönes Kit für technikinteressierte Teenager. Es ist einfach zu montieren, auch ohne viel Elektronikerfahrung. Es funktioniert garantiert! Alles, was Sie sicherstellen müssen, ist, dass die LDRs und die LEDs richtig ausgerichtet sind. Wir haben einen Kurs gemacht, indem wir schwarzes Isolierband auf eine weiße Tischplatte geklebt haben. Es ist schön zu sehen, wie die einfache Elektronik dazu in der Lage ist, dass das Auto diesem Kurs einwandfrei folgt.
Very good product. Develops children's skills. Every child should have such a robot !! I recommend to all parents !! Good engineering. I buy a second one.
Viene bien embalado y protegido. La calidad es buena por este precio. Tiene todas sus piezas e instrucciones en chino. Hay un video en internet de como montarlo (en ingles). Lo he comprado para practicar soldaduras e iniciarme en este mundillo de la electronica.
Easy to brazes, easy to tune. Funny for children.
The project is fun (i did it with my son). He enjoyed sorting out the bits and managed the soldering of the more basic components. There are labels on the PCB for where things go but you have to know that LEDs and capacitors should only be installed one way around. The switch proceed difficult but after diagnosis with a multimeter we figured out which pub to bend out of the mix. There are no instructions (as stated) but you need to "balance" the motors with the screw potentiometers before it'll follow the line. All in all it was a fun project and kept us amused for a few hours figuring things out and getting it working. Oh you'll need four short lengths of wire (not included) to connect the batteries.