Propeller reducer is needed motor than 8.5 mm, with original pinion. The project is a micro moth, 27 gr without battery, 250 mAh li-po and servo WLtoys F929.

Propeller reducer is needed motor than 8.5 mm, with original pinion. The project is a micro moth, 27 gr without battery, 250 mAh li-po and servo WLtoys F929.

Propeller reducer is needed motor than 8.5 mm, with original pinion. The project is a micro moth, 27 gr without battery, 250 mAh li-po and servo WLtoys F929.

This item is very useful, not just as a replacement if you break your F929/939 gearbox, but also for other scratcbuild projects. I have used them in several projects, including a Flitetest Mini Scout built from 3mm depron to 75% scale. The good thing is that any 8mm coreless motor will fit in it, and the pinion size is the same as the Parkzone micros such as the P-51. So you could use it as a replacement for the Parkzone gearbox on any Parkzone micro that uses the 8mm sized motor. MUCH cheaper than the Parkzond parts.

This item is very useful, not just as a replacement if you break your F929/939 gearbox, but also for other scratcbuild projects. I have used them in several projects, including a Flitetest Mini Scout built from 3mm depron to 75% scale. The good thing is that any 8mm coreless motor will fit in it, and the pinion size is the same as the Parkzone micros such as the P-51. So you could use it as a replacement for the Parkzone gearbox on any Parkzone micro that uses the 8mm sized motor. MUCH cheaper than the Parkzond parts.

This item is very useful, not just as a replacement if you break your F929/939 gearbox, but also for other scratcbuild projects. I have used them in several projects, including a Flitetest Mini Scout built from 3mm depron to 75% scale. The good thing is that any 8mm coreless motor will fit in it, and the pinion size is the same as the Parkzone micros such as the P-51. So you could use it as a replacement for the Parkzone gearbox on any Parkzone micro that uses the 8mm sized motor. MUCH cheaper than the Parkzond parts.

muy buen precio

muy buen precio

muy buen precio

I bought this to replace the bent shaft. The propeller is flexible and mine hasn't broke. This is a slot mount, and I used one on the TY's Flying Flea lookalike.

I bought this to replace the bent shaft. The propeller is flexible and mine hasn't broke. This is a slot mount, and I used one on the TY's Flying Flea lookalike.

I bought this to replace the bent shaft. The propeller is flexible and mine hasn't broke. This is a slot mount, and I used one on the TY's Flying Flea lookalike.

Брал для самолета из потолочки. В корпус входит двигатель коллекторный диаметром 8,5 мм. На конце вала двигателя диаметром 1 мм - шестерня с 9 зубами. При напряжении 3,7 В тяга около 50 грамм. Качество исполнения - отличное. Биения у винта нет.

Брал для самолета из потолочки. В корпус входит двигатель коллекторный диаметром 8,5 мм. На конце вала двигателя диаметром 1 мм - шестерня с 9 зубами. При напряжении 3,7 В тяга около 50 грамм. Качество исполнения - отличное. Биения у винта нет.

Брал для самолета из потолочки. В корпус входит двигатель коллекторный диаметром 8,5 мм. На конце вала двигателя диаметром 1 мм - шестерня с 9 зубами. При напряжении 3,7 В тяга около 50 грамм. Качество исполнения - отличное. Биения у винта нет.

I'm using this gear box+propeller with the motor (Product ID: 930767) for micro indoor foamies like this one: http://www.rcgroups.com/forums/showthread.php?t=2624444

I'm using this gear box+propeller with the motor (Product ID: 930767) for micro indoor foamies like this one: http://www.rcgroups.com/forums/showthread.php?t=2624444

I'm using this gear box+propeller with the motor (Product ID: 930767) for micro indoor foamies like this one: http://www.rcgroups.com/forums/showthread.php?t=2624444

This gearbox / propeller combination when used with it's motor uses about 1.7A at 3.8V( voltage not under load) The static thrust is only about 20g due to the high pitch prop. Weight under 8g including motor. Prop size 13.3 cm . Made 40g plane with it.

This gearbox / propeller combination when used with it's motor uses about 1.7A at 3.8V( voltage not under load) The static thrust is only about 20g due to the high pitch prop. Weight under 8g including motor. Prop size 13.3 cm . Made 40g plane with it.

This gearbox / propeller combination when used with it's motor uses about 1.7A at 3.8V( voltage not under load) The static thrust is only about 20g due to the high pitch prop. Weight under 8g including motor. Prop size 13.3 cm . Made 40g plane with it.

Двигатель с (WLtoys V911-pro V911-V2 RC Helicopter Spare Parts Main Motor) не подходит, т.к. на шестерни 7 зубьев, а надо 9. Качество на 5 баллов. Оригинально убирается люфт на выходном валу (в торце винта есть регулировочный винт). Редуктор уменьшает обороты в 4 раза. Рекомендую.

Двигатель с (WLtoys V911-pro V911-V2 RC Helicopter Spare Parts Main Motor) не подходит, т.к. на шестерни 7 зубьев, а надо 9. Качество на 5 баллов. Оригинально убирается люфт на выходном валу (в торце винта есть регулировочный винт). Редуктор уменьшает обороты в 4 раза. Рекомендую.

Двигатель с (WLtoys V911-pro V911-V2 RC Helicopter Spare Parts Main Motor) не подходит, т.к. на шестерни 7 зубьев, а надо 9. Качество на 5 баллов. Оригинально убирается люфт на выходном валу (в торце винта есть регулировочный винт). Редуктор уменьшает обороты в 4 раза. Рекомендую.

I'm trying to do a glider conversion. Basically I'm converting a Dollar three foam glider, into an RC plane, just adding the F939 electronics (pcb, geared propeller and battery). Previously, I've already successfully created the V.E.P. (Very Easy Plane), that flies perfectly, so I'm confident enough to say this glider conversion will work as well.

I'm trying to do a glider conversion. Basically I'm converting a Dollar three foam glider, into an RC plane, just adding the F939 electronics (pcb, geared propeller and battery). Previously, I've already successfully created the V.E.P. (Very Easy Plane), that flies perfectly, so I'm confident enough to say this glider conversion will work as well.

I'm trying to do a glider conversion. Basically I'm converting a Dollar three foam glider, into an RC plane, just adding the F939 electronics (pcb, geared propeller and battery). Previously, I've already successfully created the V.E.P. (Very Easy Plane), that flies perfectly, so I'm confident enough to say this glider conversion will work as well.

support moteur hélice destiné a monter sur un futur avion, ça me plait bien

support moteur hélice destiné a monter sur un futur avion, ça me plait bien

support moteur hélice destiné a monter sur un futur avion, ça me plait bien