Very strong frame, I very much doubt you would break it. Finish is nice, mine had one small chip on the upper plate. Came with standoffs for the FC and extra screws and bolts. I used 25mm standoffs for extra room and to keep the camera mount from extending above the frame. Looks to have a decent amount of room for FPV equipment. Pros: Comes with a nice PDB, camera mount and motor protectors/feet. Platic parts are not 3D printed. Cons: Only 3" props will fit. Standoffs are short. The green parts are not as bright as I would like.

Very strong frame, I very much doubt you would break it. Finish is nice, mine had one small chip on the upper plate. Came with standoffs for the FC and extra screws and bolts. I used 25mm standoffs for extra room and to keep the camera mount from extending above the frame. Looks to have a decent amount of room for FPV equipment. Pros: Comes with a nice PDB, camera mount and motor protectors/feet. Platic parts are not 3D printed. Cons: Only 3" props will fit. Standoffs are short. The green parts are not as bright as I would like.

Very strong frame, I very much doubt you would break it. Finish is nice, mine had one small chip on the upper plate. Came with standoffs for the FC and extra screws and bolts. I used 25mm standoffs for extra room and to keep the camera mount from extending above the frame. Looks to have a decent amount of room for FPV equipment. Pros: Comes with a nice PDB, camera mount and motor protectors/feet. Platic parts are not 3D printed. Cons: Only 3" props will fit. Standoffs are short. The green parts are not as bright as I would like.

Lovin this frame. Easy to build. Very stable with EMAX 1306 red bottoms, LittleBee ESCs, and Dalprop 3" tri-blade props.

Lovin this frame. Easy to build. Very stable with EMAX 1306 red bottoms, LittleBee ESCs, and Dalprop 3" tri-blade props.

Lovin this frame. Easy to build. Very stable with EMAX 1306 red bottoms, LittleBee ESCs, and Dalprop 3" tri-blade props.

This frame is a joy to build and I like that Diatone provides a lot of nice extras. The PDB is nice (although I used a different one for this build, I'll use the provided PDB some other day) and the camera mount is a nice touch too. The material looks clean, the bottom plate is strong as hell and so is the top plate. The motor protection is a nice touch and I like that it makes some feet for the quad to stand on. I do wonder what the impact is on aerodynamics though since the outer rims 'scoop' air as it passes by. The provided standoffs are a bit short which makes it important to plan everything out well but no complaints here, I'm happy that it makes the center of gravity lower (assuming you put your lipo on top). There's useful holes and slots in the carbon in all the right places, I really liked putting this frame together!

This frame is a joy to build and I like that Diatone provides a lot of nice extras. The PDB is nice (although I used a different one for this build, I'll use the provided PDB some other day) and the camera mount is a nice touch too. The material looks clean, the bottom plate is strong as hell and so is the top plate. The motor protection is a nice touch and I like that it makes some feet for the quad to stand on. I do wonder what the impact is on aerodynamics though since the outer rims 'scoop' air as it passes by. The provided standoffs are a bit short which makes it important to plan everything out well but no complaints here, I'm happy that it makes the center of gravity lower (assuming you put your lipo on top). There's useful holes and slots in the carbon in all the right places, I really liked putting this frame together!

This frame is a joy to build and I like that Diatone provides a lot of nice extras. The PDB is nice (although I used a different one for this build, I'll use the provided PDB some other day) and the camera mount is a nice touch too. The material looks clean, the bottom plate is strong as hell and so is the top plate. The motor protection is a nice touch and I like that it makes some feet for the quad to stand on. I do wonder what the impact is on aerodynamics though since the outer rims 'scoop' air as it passes by. The provided standoffs are a bit short which makes it important to plan everything out well but no complaints here, I'm happy that it makes the center of gravity lower (assuming you put your lipo on top). There's useful holes and slots in the carbon in all the right places, I really liked putting this frame together!

This is a very high quality carbon frame with nice hardware and a good simple layout. The adjustable camera mount is great as are the plastic motor protectors/landing gear. I did manage to break one of these in a very hard crash into concrete so you might want to order a spare set. However this is the only damage I have ever done to this frame. Mine came with the V7 PDB and it is very convenient with BECs and 5v and 12v output. It also has a video pass through to easily handle camera and VTX connections. Although the recommended specs show 1104 motors and 3020 props I found this a little underpowered on 3s with FPV gear. I think a better match for this frame would be 1306 motors and 3030 or 3045 props. I will be trying that combo shortly. This is a terrific little frame.

This is a very high quality carbon frame with nice hardware and a good simple layout. The adjustable camera mount is great as are the plastic motor protectors/landing gear. I did manage to break one of these in a very hard crash into concrete so you might want to order a spare set. However this is the only damage I have ever done to this frame. Mine came with the V7 PDB and it is very convenient with BECs and 5v and 12v output. It also has a video pass through to easily handle camera and VTX connections. Although the recommended specs show 1104 motors and 3020 props I found this a little underpowered on 3s with FPV gear. I think a better match for this frame would be 1306 motors and 3030 or 3045 props. I will be trying that combo shortly. This is a terrific little frame.

This is a very high quality carbon frame with nice hardware and a good simple layout. The adjustable camera mount is great as are the plastic motor protectors/landing gear. I did manage to break one of these in a very hard crash into concrete so you might want to order a spare set. However this is the only damage I have ever done to this frame. Mine came with the V7 PDB and it is very convenient with BECs and 5v and 12v output. It also has a video pass through to easily handle camera and VTX connections. Although the recommended specs show 1104 motors and 3020 props I found this a little underpowered on 3s with FPV gear. I think a better match for this frame would be 1306 motors and 3030 or 3045 props. I will be trying that combo shortly. This is a terrific little frame.

Собрал на ней коптер с sp racing f3, little bee регуляторами и 1306 моторами на 3s аккумах - летает лучше чем eachine racer 250. Очень качественный карбон, защита моторов с ногами и держалка для мелкой камеры в комплекте. Места на раме хватило впритык для OSD и видеопередатчика. Лучше использовать полетный контроллер с интегрированной OSD и видеопередатчик с антенной под пайку, без разъёма.

Собрал на ней коптер с sp racing f3, little bee регуляторами и 1306 моторами на 3s аккумах - летает лучше чем eachine racer 250. Очень качественный карбон, защита моторов с ногами и держалка для мелкой камеры в комплекте. Места на раме хватило впритык для OSD и видеопередатчика. Лучше использовать полетный контроллер с интегрированной OSD и видеопередатчик с антенной под пайку, без разъёма.

Собрал на ней коптер с sp racing f3, little bee регуляторами и 1306 моторами на 3s аккумах - летает лучше чем eachine racer 250. Очень качественный карбон, защита моторов с ногами и держалка для мелкой камеры в комплекте. Места на раме хватило впритык для OSD и видеопередатчика. Лучше использовать полетный контроллер с интегрированной OSD и видеопередатчик с антенной под пайку, без разъёма.

This little boy has the rigid bottom plate. also come with nice power distribution boards. Only problem will be can not use bigger than 3 inch props.

This little boy has the rigid bottom plate. also come with nice power distribution boards. Only problem will be can not use bigger than 3 inch props.

This little boy has the rigid bottom plate. also come with nice power distribution boards. Only problem will be can not use bigger than 3 inch props.

Fonctionne parfaitement bien. Bon rapport qualité prix. A commander sans hésitation !

Fonctionne parfaitement bien. Bon rapport qualité prix. A commander sans hésitation !

Fonctionne parfaitement bien. Bon rapport qualité prix. A commander sans hésitation !

Great tough little frame

Great tough little frame

Great tough little frame

Well made parts, even comes with a decent PBD.

Well made parts, even comes with a decent PBD.

Well made parts, even comes with a decent PBD.

So far I have had no issues with the products I receive from Banggood. My items are always in good shape. The packaging has always been to a higher standard than most companies.

So far I have had no issues with the products I receive from Banggood. My items are always in good shape. The packaging has always been to a higher standard than most companies.

So far I have had no issues with the products I receive from Banggood. My items are always in good shape. The packaging has always been to a higher standard than most companies.